Your AR.Drone uses LiPo batteries. LiPo stands for Lithium Polymer – they’re great because of their light weight and huge power storage abilities, but there are some downsides we’re finding out about. These batteries are very fragile, and there are a few specific procedures for charging and using the batteries that you should know before use.
It's always nice to find robotics fans! If you find yourself in the position of already owning some of the robots included in the BOX, you can control some of the robots you already own using our tablet and lessons,
we prefer you don't do that:
Actually, the RobotsLAB-BOX is made with you in mind. We’ve laid out easy to follow, step-by-step visual instructions and instructional videos to make sure you are completely comfortable operating any of the demonstration. You’ll look like a pro, even if it’s your first time working with robots and a tablet.
Feel free to contact us or email us if you still need support.
Each box contains the same four robots; the deluxe version features more lessons and a better warranty.
AR.Drone – can fly up to 12 minutes continuously, so use its power wisely.
Sphero – can roll for 60 minutes.
Mobot – Can drive around for more than 90 minutes.
ARMBOT – is always plugged in, so you are good to go until the next power outage.
First of all, we have three different "species" of Mobot. Look at the pictures below and pick yours out, then follow the instructions!.Charging your Mobot is really easy, but it does take around an hour so leave yourself some time before a planned lesson to check your robot and recharge it if necessary. We also suggest you charge Mobot for a little while after your lesson, so it goes back into the BOX ready for the next teacher!
Charging your ARDrone is really easy, but it does take around an hour and a half to charge from a completely dead battery, so leave yourself some time before a planned lesson to check your robot and recharge it if necessary. In order to charge ARDrone, simply open up your Accessory Kit inside the RobotsLAB BOX and pull out the ARDrone charger.
Charging your Sphero is really easy, but it does take a few hours to charge from a completely dead battery, so leave yourself some time before a planned lesson to check your robot and recharge it if necessary. In order to charge Sphero, simply open up your Accessory Kit inside the RobotsLAB BOX and pull out the Sphero charger.
The robots are powered through batteries and chargers. The robots and tablet also come fully charged and ready to rock ‘n roll!
If you’re unable to find an answer on our website, fill out the form below to start a ticket. We normally aim to respond to all emails within a few days.